Lion Laser M1300
The Lion Laser M1300 is the most used laser in the workplace. It is perfect for making large cuts and has a great build volume.
It is best suited for cutting materials up to 12mm thick.
The laser requires access in toolsquare which can be obtained during the regular instructions.
For a machine that is specialised in accurate cuts and engraving small surfaces, check out the Epilog Zing 16. Please note that this machine is not fit for cutting metal.
Spec Summary
The following table sums up the specifications relevant for the use of the Lion M1300 in our workspace.
| Work area | 1250 x 900 mm |
| Laserhead | HP 2025 industrial cutting head with coaxial gas flow and interchangeable nozzles Gas assist to 5 bar |
| Type of laser | 80W CO2-laser / 100W CO2-laser |
| Wavelength | 10640 nm |
| Pulse output | 80W / 100W |
| Required Access | Basic toolsquare access |
Useful Resources
User Manual
This manual contains all the necessary information to start working with the laser in our makerspace.
Material Settings
This file contains appropriate settings for different materials.
Cleaning Guide
This document contains information on properly cleaning the laser machine.